Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
400 G1 i3
Microsoft Windows 8.1 (64-bit)

Hi there,

 

one of my customers have 6 workstations 400 G1 i3. Problem exists on all of the pc's.  The system time changes every time. CMOS battery allready renewed. BIOS update 2.48 installed. The pc's don't have access to the internet. This pc is Windows 8.1 Pro x64. 

 

Any suggestions ? 

 

1 REPLY 1
HP Recommended

 

 

 

 

The step by step solution is as follows:
1 Boot windows
2 click start>>run and type regedit.click OK.
3 The windows registry editor should pop up.Navigate with in the explorer to:
HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\CONTRO L\TIME ZONEINFORMATION\REALTIMEUNIVERSAL needs to have the value of "1"
4 click on the TIMEZONE-INFORMATION "folder" from the navigation pane if you haven't already done so.
5 This assumes the correct key doesn't exist.If it does,you will just change the existing key value right click on the white space within the folder.Select new>DWORD value.Title the key realtimeisuniversal.Set the value to "1". Hexadecimal should be fine.
6 Either reboot and set the clock in macOS or set the clock in windows.you should now able to reboot into either OS and have a correct clock.

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.