Note on archived topics.
02-04-2012 07:28 PM - last edited on 02-21-2017 04:49 PM by OscarFuentes
Try this procedure and see if you can isolate the issue. Trouble Shooting Power Supply Issues. Don’t skip any steps.
HP Envy 17", i7-8550u,16GB, 512GB NVMe, 4K screen, Windows 10 x64
Custom PC - Z390, i7-9700K, 16GB, 512 GB NVMe, dual 512 SSDs, 2K screen, OC'd to 5 Ghz
04-13-2012 05:33 PM
I also have the exact same issue. The light is flashing and only stops when I remove the power. I tried the voltage reset multiple times, yet there is still no sight of power to my computer at all except for the green flashing light. Does anyone have any suggestions?
04-24-2012 04:53 AM
Iam also having this same problem with my computer.When I plug mobo connector while the power is on, the fans connected to the board spins for about 3seconds and stops.Then, the green light on the back flashes again.
What should I do now ?
06-12-2012 10:30 AM
This thread sounds close to what I am suffering so I thought I would butt in.
When I follow the various replugging, resetting suggestions, when I replug the mobo power plug, my machine starts to boot (fans start spinning, etc.) and then promptly dies (after a couple of seconds.)
06-16-2012 03:02 PM
my hp tower will not come on model number p6000, the green light on power supply is on but nothing turns on. is it the supply or something else i took all the cables off and un plugged the power supply until green light went off and then plugged in the connections and hooked the input cable up last and still nothing. any othe ideas, or should i try a new power supply as a next step thing?