How to adjust screen RGB, Gamma, etc on the HP Omen 27qs

[Casey129]

I wanted to create a custom screen color profile using a calibrator for my new Omen 27qs, but I don't see any way to adjust RGB, gamma, etc... just the Picture Mode profiles.

[Raj_05]

Hi @Casey129,

Welcome to HP Support Community.  

Thank you for posting your query, I will be glad to help you.

To adjust the screen settings such as RGB, gamma, and other display parameters on the HP Omen 27qs monitor, you can follow these steps.

• Access the Monitor Menu: Press the joystick button located at the rear of the monitor, or the corresponding menu button on the front bezel, to open the on-screen display (OSD) menu.
• Navigate the Menu: Use the joystick or the directional buttons on the front bezel to navigate through the OSD menu options. The exact menu structure may vary slightly depending on the monitor model, but typically you'll find the settings under a section like "Picture" or "Display Settings."
• Find Color Settings: Look for an option related to "Color," "Picture," or "Display Settings" within the OSD menu. This is where you'll find the controls for adjusting RGB, gamma, and other color-related settings.
• Adjust RGB Settings: Within the color settings, you may find separate controls for individual color channels (Red, Green, Blue) or an overall color temperature setting. If there are individual controls, you can tweak them to achieve the desired color balance. Usually, the default values should be reasonably accurate, but you can experiment and make adjustments based on personal preference.
• Gamma Adjustment: Gamma controls the brightness levels of different shades in an image. Look for a gamma adjustment setting within the OSD menu. You might have predefined gamma presets like "Standard," "Game," or "Movie," or you may have a slider or numerical value to adjust gamma manually. Again, the default settings should provide a good starting point, but you can fine-tune them as per your preference.
• Save and Exit: Once you have made the desired adjustments, navigate to the option to save the changes and exit the OSD menu. This could be an option like "Save," "Apply," or "Exit."

I hope this helps. 
 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4
HP Support 

[MadLysol]

If you go to the bottom selection under the color mode selector it lets you adjust RGB levels for the current color mode you have selected. I have found that standard mode clamps the gamut to sRGB and gaming mode clamps to DCI-P3 gamut. One nice thing about this monitor is you can adjust RGB gain levels for each color profile mode.