• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Locked

‎06-16-2017 05:56 AM

HP Recommended
Product: HP ENVY Phoenix 860-050na
Operating System: Microsoft Windows 10 (64-bit)
I bought the HP ENVY Phoenix 860-050na Desktop a year ago now and want to ipgrade the graphics card. I was wondering if the ASUS ROG STRIX GeForce GTX 1070 graphics card fitted into it with out any other upgrades needed. I appreciate all help in advance.
1 ACCEPTED SOLUTION

Accepted Solutions

‎06-16-2017 09:26 AM

HP Recommended

Hi Jwilson

 

The Asus ROG Strix 1070 is dual slot and is 11.73 inches in length and requires a minimum 500 watt power supply with one 8 pin PCIe supplemental power connector.

 

You have a 500 watt power supply. Verify it has the eight pin connector. Your chassis should be able to accommodate a dual slot graphics card.

 

The length could be a problem. Measure along the PCIE x16 slot to see if an almost 12 inch card will fit. EVGA makes comparable GTX 1070 cards that are about 10.5 inches in length.

 

You will have to uninstall the current graphics drivers and enter the BIOS to disable Secure Boot and enable Legacy Boot before installing the new card if it fits and you have the eight pin supplemental power connector.

 

Grzy

View solution in original post

Was this reply helpful? Yes No
3 REPLIES 3

‎06-16-2017 09:26 AM

HP Recommended

Hi Jwilson

 

The Asus ROG Strix 1070 is dual slot and is 11.73 inches in length and requires a minimum 500 watt power supply with one 8 pin PCIe supplemental power connector.

 

You have a 500 watt power supply. Verify it has the eight pin connector. Your chassis should be able to accommodate a dual slot graphics card.

 

The length could be a problem. Measure along the PCIE x16 slot to see if an almost 12 inch card will fit. EVGA makes comparable GTX 1070 cards that are about 10.5 inches in length.

 

You will have to uninstall the current graphics drivers and enter the BIOS to disable Secure Boot and enable Legacy Boot before installing the new card if it fits and you have the eight pin supplemental power connector.

 

Grzy

Was this reply helpful? Yes No

‎06-16-2017 09:32 AM

HP Recommended
Thanks Grzy!!
Was this reply helpful? Yes No

‎06-16-2017 09:33 AM

HP Recommended

Hi Jwilson

 

You are welcome.

 

Enjoy your new card when you get it!

 

Grzy

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.