cancel
Showing results for 
Search instead for 
Did you mean: 
natethegraet
Level 1
3 1 1 0
Message 1 of 2
351
Flag Post

Solved!

HP Omen 25L - included RGB fan cable not working

HP Recommended
Omen 25L Desktop PC
Microsoft Windows 10 (64-bit)

Product number 1X7B2AV:

 

I am connecting the RGB cables from a Cooler Master ML120 v2 to the included RGB cable exposed above the motherboard. Both the fan and the pump are working and the leds are lighting up, but they are only set to the color White. I am not able to control them via Omen Lighting Studio nor the Omen Gaming hub light controller. I also do not see any options for adding additional RGB units to either app.

Is there any way to add this connection to the OMEN Lighting Studio so I can sync all of the RGBs?

 

For reference here is a picture that shows the cable from https://www.reviewed.com/laptops/content/hp-omen-25l-2021-review

natethegraet_0-1628376406515.jpeg

This cpu fan is connected to that exposed rgb cable.

1 ACCEPTED SOLUTION

Accepted Solutions
natethegraet
Author
Level 1
3 1 1 0
Message 2 of 2
Flag Post
HP Recommended

I have solved it using some python code to directly program the LED controller. As per https://www.reddit.com/r/HPOmen/comments/nirgwa/a_way_to_change_hp_omen_lighting_with_a_python/ 

The LED controller is connected via USB directly to the motherboard, and this user has already identified the device ids. So by setting the LED Module ID to 0x04, the exposed RGB cable can be used. It would be appreciated if the Omen light studio can detect this automatically or allow adding additional RGB products.

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
natethegraet
Author
Level 1
3 1 1 0
Message 2 of 2
Flag Post
HP Recommended

I have solved it using some python code to directly program the LED controller. As per https://www.reddit.com/r/HPOmen/comments/nirgwa/a_way_to_change_hp_omen_lighting_with_a_python/ 

The LED controller is connected via USB directly to the motherboard, and this user has already identified the device ids. So by setting the LED Module ID to 0x04, the exposed RGB cable can be used. It would be appreciated if the Omen light studio can detect this automatically or allow adding additional RGB products.

View solution in original post

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation