Hi is there a motherboard schematic diagram for HP omen 8437 L02051

[1234135]

Looking for help finding schematic diagram for L02051 8437 HP omen tampa2 

[Garp_senchau]

@1234135, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

The HP Omen 8437 uses the Tampa2 motherboard. Below are some details of the motherboard specification:

Motherboard Description

• HP name: Tampa2
• SSID: 8437
• Form Factor: uATX
• Dimensions: 24.0 x 24.0 cm (9.4 x 9.4 in)
• Chipset: Z370

Processor Upgrade Information

• TDP: up to 95 W
• Socket type: LGA 1151
• Motherboard supports the following processor upgrades:

Memory Upgrade Information

• Dual channel (2 DIMMs per channel) memory architecture
• Four DDR4 UDIMM (288-pin) sockets
• Supports PC4-21300 (DDR4-2666) and PC4-19200 (DDR4-2400)
• Supports 4 GB, 8 GB, and 16 GB DDR4 UDIMMs
• Supports up to 4 GB on 32-bit systems
• Supports up to 64 GB (unbuffered) with four 16 GB modules and 32 GB (unbuffered) with four 8 GB modules on 64-bit computers

Video

• Integrated graphics: Integrated Intel UHD Graphics 630

Note: Integrated video is not available if a graphics card is installed.

Audio

• Audio Codec: ALC3863-CG
• High Definition (Azalia) 5.1 channel audio support

Note: The motherboard supports 5.1 surround sound. If the computer does not have the required audio jacks for a 5.1 configuration, additional hardware is required. Note: An internal speaker is not included with integrated audio. External speakers or headphones are required to hear sound. Note: Integrated audio is not available if a sound card is installed.

Network

• LAN: 1000BASE-T, Technology: Realtek RTL8161, Data transfer speeds: up to 10/100/1000 Mb/s, Transmission standards: 1000BASE-T Ethernet

Expansion Slots

• Two PCI Express x16 physical slots (Gen 3.0), each slot with x8 bus lanes
• One M.2 socket 1, key A
• One M.2 socket 3, key M

I/O Ports and Jumpers

• Back I/O ports

1. Optical SPDIF connector
2. DisplayPort
3. HDMI out
4. USB 2.0: 2
5. USB 3.1: 4
6. LAN (Ethernet)
7. Audio: Line in
8. Audio: Line out
9. Audio: Microphone

For more detailed information, you can refer to the official HP support documentation:

Sources

1. HP Desktop PCs - motherboard specifications, Tampa2

I hope this helps.

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Regards,