12-21-2019 01:27 PM
I'm looking for a way to hook up a Corsair Commander Pro. I have figured out how to get power to the commander Pro but it requires a USB 2.0 Connection as well. I was wondering if the Lighting Control Module Connector on the Shire Motherboard is actually just a usb 2.0 connector. Any information or ideas would be greatly appreciated.
12-24-2019 10:17 AM
@HankMcc12 Welcome to HP Community!
I understand that you would like to connect the Lighting control module connector.
Please refer to the below video.
(HP does not recommend upgrades as the device is equipped with parts that perform at its optimal performance and also, the upgradeable parts listed in HP articles are purely for your ease, though the decision to upgrade will be at your own discretion)
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!
12-24-2019 01:10 PM
Thank you for your timely response. I have watched a bunch of install videos and have a good understanding of how the Commander Pro is installed in PCs. I have read documents on the motherboard in my OMEN By HP 875-1000 and it just lists that port as a "Lighting Control Module Connector" then doesn't give me any real technical terms to go off of.Do you know if the lighting control module connector is actually a USB 2.0 connector? I don't know where that cable on the Commander Pro would plug into on the motherboard.
I also do not know what you are talking about when you say "upgradeable parts listed in HP articles". I am fairly new to PC gaming and just want to make sure I get things right and done correctly without breaking anything 🙂
12-25-2019 12:04 PM
I understand your concerns.
HP will not recommend installing the Lighting control module.
If you wish to install the module. You can install it. For more support, you have to contact the product vendor.
They will help you.
Have a nice day!!