cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Sinassassin
New member
2 0 0 0
Message 1 of 3
3,508
Flag Post

Solved!

Need to know how to force enable my Onboard HDMI

HP Recommended
HP Pavilion 580-023w
Microsoft Windows 10 (64-bit)

Intel Core i5-7400
Nividia GTX 1060 3GB
8GB Memory
1TB Hard Drive
Windows 10

Brand HP
Model 580-023w

It's one of their new gaming towers and I'm running two different vizio TVs both 32" different model lines but they should work. And it's not the TVs themselves as the both run done plug into the GPU. Exact specs aren't given but HP should know what is going into their computers. So, other display options don't show up in device manager other than the GTX 1060. I already know I need to go into the BIOS to force enable Onboard hdmi; I just need to know how as I don't mess with BIOS system unless it is for overclocking. It is counter intuitive to put 3 HDMI out ports and only have 1 work.

1 ACCEPTED SOLUTION

Accepted Solutions
Photoray002
Level 15
12,679 9,523 1,309 2,556
Message 2 of 3
Flag Post
HP Recommended

Hello @Sinassassin

 

When you say you need to force the "Onboard HDMI", you mean the two HDMI ports built into the motherboard itself, correct?

 

Integrated video is not available if a graphics card is installed. So there is no way to enable those two ports and use your GTX 1060.

Instead, you will need to use an adapter for DVI to HDMI or Displayport to HDMI.

 

Here are the specs...

https://support.hp.com/us-en/product/hp-pavilion-power-580-000-desktop-pc-series/16425610/model/1734...

 

 

View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2
Photoray002
Level 15
12,679 9,523 1,309 2,556
Message 2 of 3
Flag Post
HP Recommended

Hello @Sinassassin

 

When you say you need to force the "Onboard HDMI", you mean the two HDMI ports built into the motherboard itself, correct?

 

Integrated video is not available if a graphics card is installed. So there is no way to enable those two ports and use your GTX 1060.

Instead, you will need to use an adapter for DVI to HDMI or Displayport to HDMI.

 

Here are the specs...

https://support.hp.com/us-en/product/hp-pavilion-power-580-000-desktop-pc-series/16425610/model/1734...

 

 

View solution in original post

Was this reply helpful? Yes No
Blackmanmakinit
New member
4 4 0 0
Message 3 of 3
Flag Post
HP Recommended

 

I have the exact same machine purchased from Walmart I bought the machine to use an Oculus Rift on and for some reason the HDMI ports didnt work only the HIDMI to the video card after searching for the problem I couldnt find a solution so thats whwn the IT in me kicked in so what I did is went inot bios and enabled them they are disabled by default since an NVIDIA Geforce card is instaled and the great part is the fact that there is an Intel video card built onto the board

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation