12-24-2016 08:06 AM
So I bought a HP Omen 870-126na Gaming PC today, and have plugged it in to a monitor via HDMI, however when i turn on the PC it starts up but the monitor still says no signal. any suggestions?
Solved! Go to Solution.
12-24-2016 03:26 PM
@AlexArcherPKFR, welcome to HP Forums, this is a great place to get support, find answers and tips.
Thank you for posting your query, I'll be more than glad to help you out.
I understand that your OMEN by HP Desktop PC - 870-126na does not detect the monitor when connected by HDMI cable.
Don't worry as I have a few steps that should help fix this issue.
This issue has occurred because the normal HDMI port gets disabled when the graphics card is installed.
Hence, you need to connect the HDMI cable to the Graphics card port on the desktop PC which is next to the port that you have connected.
Let me know how that works.
I hope you have a good day ahead.
12-30-2016 06:53 AM - edited 12-30-2016 06:54 AM
Thank you for the response. The problem was exactly as you stated and the HDMI cable I was using was faulty. New HDMI cable and connected into the correct HDMI (Graphics card port) fixed the problem.
08-29-2017 04:02 PM
08-30-2017 10:54 AM
I actually researched about the GeForce GTX 1060 3gb, and apparently it has 3 working DisplayPorts and a single DVI port too. I think the only way to display (if you're already using an hdmi) is to get a DisplayPort cable and connect that. (ctrl+F for hdmi)
So it has 1 hdmi, 3 DisplayPorts, and 1 DVI supported on the 1060. DisplayPort is the one slightly bigger than HDMI and it's like a rectangle with one corner cut off. You'll have to buy the cord from Display to HDMI if you don't have one already, or just use DVI, your choice.
11-10-2017 11:17 AM
hi every body,
I am using hpworkstation, i am facing the problem of no signal of hdmi when system is going to start and then monitor goes for sleeping mode.Icleaned ram, then remove the video card but still i can not use my pc. please help me.
07-10-2019 07:38 AM
Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire:
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!