-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Gaming
- Gaming Desktops
- Re: Omen 30l corrupted bios bootloop

Create an account on the HP Community to personalize your profile and ask a question
11-11-2023 02:01 PM
@Safe3 wrote:It keeps on going to 32% and then restarts and beeps 8 times then it says I have a corrupt bios and it’s fixing it then the process repeats it self please help
The fact that it beeps is actually good.
You may only need to do the CMOS reset procedure
https://support.hp.com/us-en/document/ish_3966820-3438449-16
The CMOS can be reset with the "V" key as described here
alternately, remove the CMOS battery after turning off the system.
https://support.hp.com/us-en/document/c05581329
Try the above
What is product ID or exact model of your 30L ?
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
11-11-2023 02:52 PM - edited 11-11-2023 02:53 PM
I think you have GT13-0052na is that correct?
How did this happen?
Check warranty and get a quote from support
https://support.hp.com/us-en/checkwarranty
https://www.hp.com/us-en/contact-hp/ww-contact-us.html
If out of warranty see if this board matches yours
https://www.ebay.com/itm/166054989302
verify the part numbers if you can. I looked up GT13-0052na and the board is "Dorado OC" but there might be different versions. You need to check the HP part number before getting a replacement.
This is the bios chip. I was unable to find a replacement chip on ebay for the 30L but is is possible to re-flash the bios by attaching an inexpensive USB device to the chip. Takes some skill though.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it