-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Gaming
- Gaming Desktops
- Re: Outdated CPU Microcode on HP OMEN 25L (SSID 894A)

Create an account on the HP Community to personalize your profile and ask a question
11-02-2026 08:26 AM
Hello HP Support,
I have an HP OMEN 25L (GT15-0xxx, motherboard SSID 894A) upgraded from an i7-12700F to an i7-14700F.
I'm currently using BIOS F.80, which supports the 14th Gen CPU, but the CPU microcode is still 0x11C. Some games warn that this version is outdated and recommend 0x12B or newer.
HP Support Assistant only offers BIOS F.48, while HP's documentation requires F.80 or later for 14th Gen CPUs.
How can I safely update my CPU microcode to 0x12F or newer? Is there an official BIOS update or another supported solution?
Thank you!
11-02-2026 09:29 AM
Welcome to our HP Community forum!
Thank you for providing the motherboard SSID and your current BIOS and microcode versions. This is an important issue, particularly because you have upgraded your system to a 14th-generation Intel processor.
I have investigated HP's documentation and Intel's latest recommendations. Unfortunately, there is a complication concerning the BIOS versions available for your motherboard.
1. Intel's recommended microcode update:
Yes, Intel has identified the Vmin Shift instability issue affecting certain 13th- and 14th-generation desktop processors.
The recommended mitigation includes Intel microcode 0x12F or later.
Your reported microcode revision, 0x11C, is older than the recommended version.
Intel's current guidance explicitly recommends updating to the latest BIOS containing microcode 0x12F or later, even when the computer is operating normally.
Reference: Intel – 13th and 14th Gen Desktop Processor Vmin Shift Instability
HP has also confirmed that it incorporated microcode 0x12F into BIOS updates for affected systems beginning April 25, 2025.
2. HP BIOS F.80 and 14th-generation processor support:
HP's documentation identifies BIOS F.80 Rev.A or later as the minimum BIOS requirement for upgrading the OMEN 25L GT15-0000i with motherboard SSID 894A to a 14th-generation processor.
Therefore, your existing BIOS provides the required processor compatibility.
However, processor compatibility and the inclusion of Intel's subsequent microcode security and stability updates are two different things.
Reference: HP – OMEN 25L/40L/45L Intel Processor Upgrade Information
3. An important discrepancy in HP's available BIOS updates:
I found an HP firmware update bulletin dated February 2026 that lists the following BIOS package for your motherboard family:
Desktop: OMEN 25L GT15-0xxx
Motherboard SSID: 894A
BIOS: F.48 Rev.4
SoftPaq: SP172772
Link: HP BIOS SP172772 – F.48 Rev.4
This package appears in HP's February 2026 Intel Processor Firmware Security Update.
However, I would not recommend installing F.48 over your existing F.80 BIOS without first obtaining confirmation from HP.
There have been previous reports involving OMEN 25L systems with the same 894A motherboard where the F.4x BIOS installers would not permit updating systems already running BIOS F.81.
This suggests that there may be different BIOS release paths for these systems.
I would not attempt to force a BIOS downgrade, bypass the HP installer restrictions or install a modified BIOS.
4. What I recommend doing next:
Before attempting another BIOS update, I would establish the following:
Confirm your exact HP product number (not the serial number).
Confirm the complete BIOS version and release date using Windows System Information (msinfo32).
Verify the currently loaded microcode revision using HWiNFO.
Check Windows Update > Advanced Options > Optional Updates for any HP firmware updates.
If HP Support Assistant offers F.48 whilst your system is running F.80, I would specifically ask HP to confirm whether that particular SoftPaq is intended to update your existing F.8x firmware branch.
5. HP firmware engineering escalation:
In my opinion, this issue deserves attention from HP's BIOS/firmware engineering team.
I would like HP to clarify three specific questions:
Is there an officially supported BIOS for the OMEN 25L GT15-0xxx, motherboard SSID 894A, currently running F.80 or F.81, that includes Intel microcode 0x12F or later?
Is the publicly listed F.48 BIOS package compatible with systems already running the F.8x firmware branch?
If not, is HP planning to provide an updated F.8x BIOS containing the required Intel microcode?
A standalone microcode update from an unverified third-party source is not something I would recommend.
The preferred solution is a validated HP BIOS update.
Could you provide your exact HP product number and the BIOS release date shown in msinfo32?
Please do not publish your serial number.
Those details may help establish which firmware branch applies to your particular system.
Kind Regards,
NonSequitur777
11-02-2026 08:35 PM
Thank you for your detailed response.
My product number is 644L1PA#AB2, and my current BIOS is F.80, dated October 12, 2023.
My i7-14700F works correctly with F.80, but the microcode remains at 0x11C.
Could you please help escalate this to HP's BIOS/firmware engineering team to determine whether an updated BIOS with microcode 0x12F or newer is available for motherboard SSID 894A?
Thank you for your help!
11-02-2026 09:08 PM
Thank you for providing the exact product number and BIOS release date. That helps narrow down the issue considerably.
I have done some additional research, and I do believe your case indeed warrants a formal investigation by HP's BIOS/firmware engineering team.
There are several important points I would like to clarify.
1. Your exact OMEN 25L configuration:
HP identifies product number 644L1PA as the OMEN 25L GT15-065acn, originally equipped with an Intel Core i7-12700F and a BlizzardL motherboard.
Your reported motherboard SSID is 894A.
HP's processor-upgrade documentation explicitly identifies the OMEN 25L GT15-0000i with SSID 894A as supporting 13th- and 14th-generation Intel processors with BIOS F.80 Rev.A or later.
However, the documentation does not explicitly identify your GT15-065acn configuration. I would therefore ask HP to confirm that your exact product number is covered by the same processor and firmware compatibility provisions.
2. HP's February 2026 BIOS documentation:
I found something particularly relevant.
HP's February 2026 Intel Processor Firmware Security Update lists the following firmware package for the OMEN 25L GT15-0xxx with motherboard SSID 894A:
BIOS: F.48 Rev.4
SoftPaq: SP172772
This is important because it establishes that HP has published a subsequent BIOS package for the 894A motherboard family.
However, I cannot establish whether this package contains microcode 0x12F or later, or whether it is an approved update path for a system currently running F.80.
I would not recommend attempting to install F.48 over your existing F.80 BIOS without explicit confirmation from HP.
Reference: https://support.hp.com/us-en/document/ish_14057018-14057042-16/hpsbhf04087
3. Intel's microcode recommendations:
Intel's latest published guidance, reviewed July 21, 2026, continues to recommend running the latest BIOS containing microcode 0x12F or later for affected 13th- and 14th-generation desktop processors.
Your i7-14700F and currently reported microcode revision 0x11C therefore warrant further attention.
Reference: https://www.intel.com/content/www/us/en/support/articles/000102331/processors.html
4. Requesting an HP engineering investigation:
I would like to be transparent about one limitation: I participate in this forum as a volunteer HP Community Expert, not as an HP employee. I cannot directly submit an internal engineering escalation on your behalf.
Perchance @Animatryx or @Riddle_Decipher can assist in this matter?
By default, I recommend contacting HP Support China directly and requesting a formal technical support case, specifically asking for escalation to the BIOS/UEFI firmware engineering team.
I would suggest requesting written clarification on the following:
Does HP SoftPaq SP172772 (F.48 Rev.4) contain Intel microcode 0x12F or later?
Is F.48 Rev.4 officially compatible with your OMEN 25L GT15-065acn, product number 644L1PA#AB2, currently running BIOS F.80 dated October 12, 2023?
If F.48 is not compatible with the existing F.80 firmware installation, is HP maintaining a separate F.8x BIOS release branch for this motherboard?
Is HP planning to provide an updated BIOS for SSID 894A containing Intel's recommended microcode 0x12F or later?
Does HP officially validate the i7-14700F upgrade for your exact GT15-065acn product configuration?
I would also recommend asking HP Support to provide a case reference number so that the matter can be followed up.
Please provide your serial number only through HP's private support channel, not in this public discussion.
My recommendation:
I agree that this deserves an official response from HP.
Your system is operating correctly, but processor compatibility and the subsequent Intel microcode stability mitigations are two different matters.
I would not recommend third-party microcode injection, modified BIOS images, or attempting to force-install a different BIOS branch.
The appropriate solution is an officially validated HP firmware update.
Thank you for taking the time to investigate this issue and for providing the additional information. It has helped identify a potentially important discrepancy in HP's firmware support documentation.
Kind Regards,
NonSequitur777
11-03-2026 09:49 AM
Hi @NonSequitur777 ,
Thanks for all your hard work and digging into the details on this. I really appreciate it, I am checking directly with our engineering team using the info you pulled together, and I will share an update here as soon as we hear back.
@orfevre Please halt any BIOS or microcode updates until we get an answer from engineering. I will keep you posted and drop an update once we have a clear path forward.
Animatryx
I am an HP Employee
Learn, Share and Grow together!
Unlock the Debutant's Badge at Level 5
Reach Level 5 and you'll be eligible to add the Debutant's Badge to your profile.
1. Go to My Settings.
2. Select Personal → Personal Information.
3. Righ-Click on the badge to "copy image address"
4. Paste it under Signature and save changes.
11-03-2026 01:22 PM
Thank you very much for your kind support in this matter!
Let's hope the OP doesn't have to wait too long for a response from the relevant HP team.
Kind Regards,
NonSequitur777
11-04-2026 04:56 AM
@orfevre To look into this further, we’ll need some additional information about your system. I’ve sent you a private message requesting the necessary details to protect your privacy. Please reply with the requested information, and we’ll be happy to assist you further.
Animatryx
I am an HP Employee
Learn, Share and Grow together!
Unlock the Debutant's Badge at Level 5
Reach Level 5 and you'll be eligible to add the Debutant's Badge to your profile.
1. Go to My Settings.
2. Select Personal → Personal Information.
3. Righ-Click on the badge to "copy image address"
4. Paste it under Signature and save changes.
11-04-2026 10:22 PM - edited 11-05-2026 01:22 AM
Hi ,
I'm still unable to access my private messages. I also receive the following error when trying to click on the link in my mail:
"You do not have sufficient privileges for this resource or its parent to perform this action."
It seems there may be a permissions issue with my HP Community account.
Could you please check my account permissions and help me access private messages?
Thank you for your assistance!