• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
HP Recommended
OMEN 25L Desktop - GT12-022qd CTO

I used to be running 3200 ram speed and now its running at 2933 and I haven't changed or messed with any of the parts inside the pc, please help.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@tyisfire wrote:

I used to be running 3200 ram speed and now its running at 2933 and I haven't changed or messed with any of the parts inside the pc, please help.


@tyisfire 

 

Are you sure ? Its motherboard supports

  • Dual channel (2 DIMMs per channel) memory architecture
  • Four DDR4 UDIMM (288-pin) sockets
  • Supports up to PC4-23400 (DDR4-2933)
  • Supports 8 GB and 16 GB DDR4 UDIMMs
  • Supports up to 4 GB on 32-bit systems

You can see it has 3200MHz RAM on your machine but it always runs at 2933MHz. You can add more RAM and higher speed but will always run at 2933 MHz.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




View solution in original post

4 REPLIES 4
HP Recommended

Did you put in additional non-HP Ram sticks? If not, make sure you have the correct settings in the Omen Gaming Hub.
Although I am unsure why it would clock down to 2933.
What program did you use to check the mem speed?

Edit: On my 25L Taskmgr shows it as 3200 MT/s ram, so something is going on indeed. No clue what though 😞
Edit 2: Your motherboard is an Intel H470 chipset, whereas I'm running a B550. That's why there is a difference between our 25L's

HP Recommended

I did not add any additional ram, I used task manager to check speeds.

HP Recommended

my ram is in slots 1 and 3 should it be in slots 2 and 4

HP Recommended

@tyisfire wrote:

I used to be running 3200 ram speed and now its running at 2933 and I haven't changed or messed with any of the parts inside the pc, please help.


@tyisfire 

 

Are you sure ? Its motherboard supports

  • Dual channel (2 DIMMs per channel) memory architecture
  • Four DDR4 UDIMM (288-pin) sockets
  • Supports up to PC4-23400 (DDR4-2933)
  • Supports 8 GB and 16 GB DDR4 UDIMMs
  • Supports up to 4 GB on 32-bit systems

You can see it has 3200MHz RAM on your machine but it always runs at 2933MHz. You can add more RAM and higher speed but will always run at 2933 MHz.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.