• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Locked

‎10-15-2021 01:55 AM

HP Recommended

just a quick question, that i could not find anywhere else.

 

i want to buy hyperx fury memory 2x8gb. im not sure what my current RAM is using but if i must trust the hp website it runs 3200mhz at 1.2v will it matter if i buy 3200mhz at 1.35v and pair the 2 wit my existing (1.2v) ones? also will my motherboard support it? 

 

Hana

  • Model: Micro ATX: 24 x 24 cm
  • Chipset: B550
  • memorysockets: 4 x DDR4 (288-pins)
  • Processorsocket: AM4
  • expansionslots:
    • one PCI Express 4.0 x16 lanes
    • one PCI Express 3.0 x1 lanes
    • one M.2-socket 1, key A
    • two M.2-sockets 3, key M (voor SSD-kaart PCIe x4 Gen 3)

     

     

Category:
1 ACCEPTED SOLUTION

Accepted Solutions

‎10-15-2021 01:33 PM

HP Recommended
@THHLubberink wrote:

,, i want to buy hyperx fury memory 2x8gb. im not sure what my current RAM is using but if i must trust the hp website it runs 3200mhz at 1.2v

@THHLubberink 

 

It uses standard DDR4 voltage which is 1.2 volt using 1.35 volt won't help and may cause many troubles than good.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2

‎10-15-2021 01:33 PM

HP Recommended
@THHLubberink wrote:

,, i want to buy hyperx fury memory 2x8gb. im not sure what my current RAM is using but if i must trust the hp website it runs 3200mhz at 1.2v

@THHLubberink 

 

It uses standard DDR4 voltage which is 1.2 volt using 1.35 volt won't help and may cause many troubles than good.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




Was this reply helpful? Yes No

‎10-16-2021 07:11 AM - edited ‎10-16-2021 07:27 AM

HP Recommended

1 more question since you got the answers. 🙂

 

does the PC4-25600 specifaction matter if i would for example buy : HyperX FURY - DDR4 - 16 GB: 2 x 8 GB - DIMM 288-PIN - 2666 MHz / PC4-21300 - CL16 - 1.2 V - niet-gebufferd - niet-ECC - zwart

 

and if im correct this set would downgrade my current 2x8gb memory to 2666mhz and wont have complications, right?

 

EDIT:

this ram i found just now should be good right?

 

https://www.copaco.com/nl-nl/hardware/kingston-technology-fury-renegade-geheugenmodule-16-gb-2-x-8-g...

i cant find out the pc4 on the site tho. but im also not sure if this really is that important

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.