Windows 11 Install fails - Driver Overran Stack Buffer

[Gburns53]

Anyone else having issues? I did put in new RAM a while back, but I am not running anything like XTU to get it to register correct speeds. I removed it. No overclock active. I've tried all the system checks out there to. I added a fan a while back, but it was just on a splitter, no bios changes. Used HP Update center to get latest updates and new BIOS. Nothing works. It always gets to same point booting the new install and gives me the blue screen - Driver Overran Stack Buffer. 

[Dilip_18]

Hi@Gburns53,

Welcome to the HP Support Community! I'd like to help!

I see you are experiencing Blue screen issues with the HP Notebook PC gets error message in Windows 11.  

I have a few recommendations 

• There are various reasons that could cause this error. Some of them are corrupted system files, overclocked computers to achieve better performance, incompatible peripherals etc.
• Update your Notebook computer to latest BIOS from HP.COM.
• Make sure the Windows and HP support assistant updates are up to date. 
• Steps to Safe Boot Into Windows
• Method 1: Check for Windows Updates
• Method 2: Update System Drivers
• Method 3: Disable Fast Startup
• Method 4: Perform System File Checker Scan
• Method 5: Check Your Hard Drives
• Method 6: Remove or Disable Recent Hardware Changes
• Method 7: Run Windows Memory Diagnostic Tool
• Method 8: Windows Reset From Startup Repair

The HP Cloud Recovery Tool allows you to download recovery software to a USB drive. You can use the downloaded recovery image file in order to install the Windows operating system. 

Click here for the HP Cloud Recovery Tool (Windows 11) link.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!