my pc does not see the ssd with the system

[Artem2023EU]

good afternoon, tell me how to make my PC boot from a 256GB SSD, when I boot from it it says non-system hard drive, please help, how to make it boot from an SSD, hp compaq 6005 pro microtower, please help

[Artem2023EU]

Ssd patriot 256gb 

[Paul_Tikkanen]

Hi:

Did you install an operating system on the disk?

That is the error you get when there is no operating system installed.

[Artem2023EU]

I installed the operating system on the ssd disk, but the bios does not see something, but if I connect the hard disk to it, it boots from the ssd disk, the problem is that it does not see the ssd as a bootable disk, help version bios my v01.03 

[Paul_Tikkanen]

Do you have the SSD SATA data cable connected to the primary SATA port (0)?

It won't boot from SATA port 1.

[Artem2023EU]

can you please describe each sata port connector 0,1,2,3 and what each of them is responsible for, for example, sata port 1 is responsible for starting the system from the ssd disk and where to connect the ssd itself with a sata cable so that the pc started booting from the ssd disk

[Paul_Tikkanen]

Hi:

Please refer to the Hardware Reference Guide Chapter 2, pages 23 & 24 for how to connect hard drives and optical drives in their respective data ports.

c01870924.pdf (hp.com)

Your new SSD must be connected to the dark blue SATA port (0).

[Artem2023EU]

good day, it didn't help, the same error says that there is no system on the ssd disk, but it is installed there, help

[Paul_Tikkanen]

You're very welcome. 

Unfortunately, I wouldn't know what the problem could be, and don't have any other suggestions for you to try. 

[Artem2023EU]

my pc is loaded into the operating system if there is an hdd disk, but without it it does not load from the ssd disk, what could this be related to the bios