• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
HP Recommended
Microsoft Windows 11

I’ve got a HP Victus 16.1 and I opened my computer like every other time and it didn’t ask for a password or anything and it showed my previous screen for a second then my screen went black then my power button started flashing  and it will still not turn on but only flash and I’ve tried going into bios and doing a “ hard reset” but neither worked

1 REPLY 1
HP Recommended

Hi @Nolan420,

 

Welcome to the HP Support Community

 

I understand you are facing an issue with your HP Victus 16 won’t turn on. The screen is not turning on Not to worry I will help you to get a resolution to resolve the issue.

 

May I know 

Do you see an HP Logo when you try to turn on the unit and then the screen goes blank or blue screen, If Blue screen Have observed any error message?

 

Please try the following Troubleshoots steps. 

 

1.    Turn off the Unit.

2.    Disconnect the AC adapter.

3.    Remove any discs from the disc drive.

4.    Remove memory cards from the card reader slot.

5.    Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives, and USB flash drives.

6.    Disconnect the AC adapter press and hold the power button for approximately 15 seconds.

7.    Reconnect the AC adapter, and then turn on the computer.

 

Step 2

Turn off the unit and please press and hold the Windows key + letter B key and the power button together for 30 seconds after 30 seconds, 1st release the power button but keep holding the Windows key and B key for ten more seconds and then release these two keys If done correctly, you will see the display flashing once. Please attempt it thrice as this step and Restart the unit

 

Step3

 

The unit has to be turned off, Press Win+ V while holding these two keys then Press the Power button, continue to hold all three keys for 30 seconds and then release the Power button first and then release these two keys Please attempt it thrice  and then you may get a Pop-Up CMOS Check and it will restart the unit 

Even if you don't get a Pop-up restart the unit manually after 3 attempts.

 

After the above  troubleshooting steps if the unit  turns on 

 

HP Laptop Starts but No Display | Black Screen | HP Support

click here and follow the troubleshooting steps  HP PCs - The Computer does not boot or start

 

Please  update Windows and HP support assistance updates 

And update Bios and other drivers please click on the link. to update the drivers. 

follow this link to run the test hardware test 

 

I hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Take care and have a good day.
Gaya1239 – HP Support.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.