Laptop is not starting, only power button is blinking

[pritamraj9801]

My laptop is hp omen which is not starting, only power button light is blinking. 

[Ric_ob]

Hello, @pritamraj9801 

Thank you for visiting the HP Support Community!

Admin and Mods are here to guide the customer to get the best experience from the Community.

To help volunteers that reply to posts in the Community, please provide more details about your issue. Here are some recommendations of information that can help volunteers to better understand and provide support to your question:

- Exact model of your printer / Desktop/ notebook (if you need help, click here for information on how to find your model number model).
- Operating system (including revisions made with service packs, 32-bit or 64-bit, etc.)
- Connection method - USB, physical LAN, or wireless?
- Error messages - on the printer display and/or computer, any patterns for flashing lights.
- Any system changes before the problem starts (Example: Operating System Update, Software installation);

 
Please let us know if you have any additional questions or concerns. Our job as HP moderators is to monitor all traffic on the community.

Thank you.

[Dilip_18]

Hi@pritamraj9801,

Welcome to the HP Support Community! I'd like to help!

I see you are experiencing issues with the HP Omen Notebook not booting to windows just goes to a black screen. 

Check with alternate charger if available or a different wall outlet.

The BIOS can be corrupted during normal operation from a failed BIOS upgrade, or damage from a virus.   

Recover the BIOS using a key press combination. 

Turn off the computer. Press and hold the Windows + b keys, and continue to press those keys while you press and hold the power button for 2 to 3 seconds. Release the power button, but continue pressing the Windows + b keys. 

The power light remains on, and the screen remains blank for about 40 seconds before anything is displayed. You might hear a series of beeps (usually 8 beeps). Eventually, an HP BIOS Update screen is displayed and the BIOS update begins automatically.   

NOTE: If the HP BIOS Update screen is not displayed, press and release the power button, and then immediately press the Windows + b keys at the same time, repeatedly, until the computer beeps or opens the HP BIOS Update screen. 

After the BIOS is recovered, a Continue Startup button is displayed and a timer counts down. Click the Continue Startup button to restart the computer immediately, or wait for the computer to restart automatically when the timer reaches zero.

If issue still persist then test the hard drive using HP PC Hardware Diagnostics UEFI to rule out other hard drive issues

1. Start or restart the computer.
2. Press F2 repeatedly during start up to enter the HP PC Hardware Diagnostics UEFI utility.
3. Select Component Tests > Hard Drive > Quick Test.
4. Click Run Once.

Once the test completes, results are displayed on the screen.

If the drive passes all tests, continue to restore a computer back to the factory default, which will isolate whether it’s a software or hardware issue. 

For any hardware issue or repair please click on the link Phone Assist Worldwide

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!