-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Gaming
- Gaming Notebooks
- Re: MAC AC-7265. Problems after replacing modem.

Create an account on the HP Community to personalize your profile and ask a question
03-31-2018 01:47 AM
Hello. I've got problem with MAC filter in router. When I add my MAC adress, I've got communicate that "MAC adress can't be multicast". My WiFi modem was replaced with a new one under warranty. With a previous one I had no problems (with MAC). Please help.
Solved! Go to Solution.
Accepted Solutions
03-31-2018 02:17 AM
Hi
Make, Model and OS please of the PC and then details of the Modem.
03-31-2018 03:23 AM - edited 03-31-2018 03:31 AM
Do you mean it?
CISCO Linksys WAG54G2 soft :V1.00.19
AC-7265 soft:19.51.11.2
Protokół: 802.11g
Typ zabezpieczeń: WPA2-Personal
Pasmo sieci: 2,4 GHz
Kanał sieci: 11
Adres IPv4: 192.168.1.101
Serwery DNS IPv4: 194.204.152.34
194.204.159.1
Producent: Intel Corporation
Opis: Intel(R) Dual Band Wireless-AC 7265
Wersja sterownika: 19.51.11.2
Before replacing modem, I've got no problems with MAC.
03-31-2018 03:38 AM
Hi
Your DNS servers are
inetnum: 194.204.152.0 - 194.204.152.255
netname: TPNET
descr: Commercial IP network of Polish Telecom
inetnum: 194.204.159.0 - 194.204.159.255
netname: TPSA-DNS
descr: local network
Manual is here...
http://setuprouter.com/router/linksys/wag54g2/manual-265.pdf
03-31-2018 04:01 AM
Hi
It will take some time to get approval on the picture.
https://communities.intel.com/thread/124047 may have been better posted at Linksys.
Multicasting...
This is sending a Message to many of the computers on the network, typically that there is a Network Shutdown or Problem.
OR to assign routing protocols or priorities etc.
So your MAC address would not be right for this.
You normally only need to manually enter a MAC address to include it in a specific list of ALLOWED devices that can use the router, or to DENY in another list.
So what are you trying to achieve?
