cancel
Showing results for 
Search instead for 
Did you mean: 
lewis50504
Level 1
9 5 0 1
Message 1 of 5
4,193
Flag Post

Solved!

Omen command center fans not changing? High cpu temps

HP Recommended
15-EK0013DX
Microsoft Windows 10 (64-bit)

These are my temps for warzone and league. Warzone I'm just in the mainmenu and already over 90% on cpu

https://prnt.sc/tm62si and league is at 88% https://prnt.sc/tm6stf

 

I also tried to put the fan speed at full in the omen control center and I'm not really noticing any loud noises or the speed of the fans ramping up. Is that normal? It feels like its spinning the same in all the settings, wether its max, auto or manual with the slider at full speed or low speed. What's going?  This is my command center settings;  https://prnt.sc/tm64ht

I ran a aida64  stress test on the cpu with Hwinfo and this is what I got ; https://prnt.sc/tmcnb4

What can I do to fix the temps? Cause for me the biggest issue seems the fans aren't going max settings or pushing at all, seems to just spin in one setting. Air is being pushed out the back and the sides,  I can feel air coming out and bringing my ear close to the laptop, I can hear the fans spin but its not very loud even on max fan speed. When I first booted up this laptop and was updating everything, the fans were very loud and spinning fast, but now it doesn't even make that much noise under heavy load.

Any help? 

 

 

4 REPLIES 4
Waley
Level 5
Level 5
138 132 13 61
Message 2 of 5
Flag Post
HP Recommended
 

@lewis50504

Hi Lewis, from your OMEN Command Center photo, the CPU temperature is 64C, it doesn't need fan to run at high speed. When you set to "Performance mode", system will run with high performance and the temperature control limit will be higher than default mode as well.

About the fan manual control, the slide is to control the max fan speed, but overall the fan speed still under system control. It means if you set to the slide to central level, the fan speed will be controlled no more higher than this setting, but if system run at low loading, the CPU/GPU temperature is low, the fan still run with lower speed. if system with heavy loading, the fan will run with high speed but will not higher than your setting slider level. If system still add stress testing, OMEN Command Center will control the CPU/GPU power to make sure fan still under your setting level. This is overall fan manual control on this product. Not sure if it is clear.

let us know if you have more questions.

image.png

0 Kudos
lewis50504
Author
Level 1
9 5 0 1
Message 3 of 5
Flag Post
HP Recommended

Oh that makes sense, I thought sliding it to max speed, would just set the fan speeds to full right away. So when my laptop is hitting high temps only then will the system push the fan speed to full fan speeds when the system needs it? Thanks for the reply. 

I guess the high temps on less demanding games like League, is due to my room temp as well. 

0 Kudos
Waley
Level 5
Level 5
138 132 13 61
Message 4 of 5
Flag Post
HP Recommended

Hi Lewis, so if you set to "Manual" control and slide to right max, yes, system will base on your PC loading and temperature sensor to control the fan speed.

it is not 100% manual, maybe 50% manual, another 50% still smart control by system. 😀

but it is really effective, to make sure energy saving, benefit for fan module life.

0 Kudos
PhilipCSwift
Level 1
3 2 0 0
Message 5 of 5
Flag Post
HP Recommended

Uninstall the Omen command centre you have and download the new one from Microsoft App store at https://www.microsoft.com/en-gb/p/omen-command-center/9nqdw009t0t5?activetab=pivot:overviewtab

My gear>omen>performance control

 

 

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation