Please tell me the thickness of the thermal pads on the omen 17 cb1029ur laptop ?

[Ivan118]

Please tell me the thickness of the thermal pads on the omen 17 cb1029ur laptop ?

[ub6424]

Hello @Ivan118 

Sorry to hear that you are having problems ... and I would like to help you.

Problem (1) HP thermal pads at HP Partsurfer are out of stock !

Thermal pad kit

HP spare part number: L57444-001

https://partsurfer.hp.com/partsurfer?searchtext=L57444-001&searchby=part

Problem (2) Service manual does not tell exact information

(3) ! Read post here ! -> Thermal paste and pad update for HP Omen 15

( Similar to Omen 17 )

(4) Download -> Maintenance and Service Guide

Page 37 Component replacement procedures

Page 44 Chapter 6 Removal and replacement procedures for authorized service provider parts

Page 45 Component replacement procedures

Page 46 Chapter 6 Removal and replacement procedures for authorized service provider parts

There are 2 heat sink configurations:

(5) Please report your results

[NonSequitur777]

@Ivan118,

And to add to @ub6424's response, I would like to mention the following:

As to the thickness of the 38 x 38 mm thermal pad you need for your i9-9xxx, I would not go thicker than 0.5mm, and preferably choose a high quality 0.2mm pad, such as the "Thermal Grizzly Carbonaut high-tech carbon thermal pad" as seen here: https://www.thermal-grizzly.com/en/products/299-carbonaut-en.

Then again, please be reminded that thermal pads are not as efficient at heat transfer as thermal pastes.

Hope this was helpful.

Kind Regards,

NonSequitur777