Worst updates

[Om161]

This this is of every time whenever update of OMEN Gaming Hub comes it always auto update and ever time after an update a new bug just arrives. We pays in lakhs for OMEN Laptop and you don't even manage an single app properly, than you takes money of which thing, where is service to customer, your Command center is almost had unusable whenever needed due to you update bugs.
Right now I am unable to operate Undervolting, Network Booster, performance Control. It Shows that update and when I do update it tells to reboot and after reboot it again shows same page to update.
worst service ever OMEN it is extremely disappointing not getting service after paying this much.

[Gaya1239]

Hi @Om161,

Welcome to the HP Support Community

I understand you are facing an issue with your HP OMEN drivers update. Not to worry I will help you to get a resolution to resolve the issue.

Please try the following Troubleshoots steps.

Step 1

1.    Turn off the Unit.

2.    Disconnect the AC adapter.

3.    Remove any discs from the disc drive.

4.    Remove memory cards from the card reader slot.

5.    Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives, and USB flash drives.

6.    Disconnect the AC adapter press and hold the power button for approximately 15 seconds.

7.    Reconnect the AC adapter, and then turn on the computer.

Step 2

Turn off the unit and please press and hold the Windows key + letter B key and the power button together for 30 seconds after 30 seconds, 1st release the power button but keep holding the Windows key and B key for ten more seconds and then release these two keys If done correctly, you will see the display flashing once. Please attempt it thrice as this step and  Restart the unit

Step3

The unit has to be turned off, Press Win+ V while holding these two keys then Press the Power button, continue to hold all three keys for 30 seconds and then release the Power button first and then release these two keys Please attempt it thrice  and then you may get a Pop-Up CMOS Check and it will restart the unit 

Even if you don't get a Pop-up restart the unit manually after 3 attempts.

Please check and update Windows and HP support assistances drivers 

Update the BIOS, Video card & Chipset drivers:

• Here's the link to download and install the above updates: Click here

Perform Windows Update and HP Support Assistant: (do not skip any troubleshooting steps if you feel steps are repeating) 

To check for updates now, select the Start button, and then go to Settings  > Update & security  > Windows Update, and select Check for updates.

Install updates from HP Support Assistant: Go to Download HP Support Assistant to install the tool.

1. To open HP Support Assistant, double-click the HP Support Assistant icon 

.

1. Click My devices in the top menu, and then click Updates in the My PC.
2. Click Check for updates and messages to scan for new updates.
3. Review the list of updates. Updates with a yellow information icon are recommended. Updates with a blue information icon are optional.
4. Click the update name for a description, version number, and file size.
5. Select the box next to any updates you want to install, and then click Download and install.

Run network commands

Try running these network commands to manually reset the TCP/IP stack, release and renew the IP address, and flush and reset the DNS client resolver cache:

Select Search on the taskbar, and type command prompt. The Command Prompt button will appear. To the right of it, select Run as administrator > Yes.

At the command prompt, run the following commands in the listed order, and then check to see if that fixes your connection problem:

Type netsh winsock reset and select Enter.

Type netsh int ip reset and select Enter.

Type ipconfig /release and select Enter.

Type ipconfig /renew and select Enter.

Type ipconfig /flushdns and select Enter.

If the issue persists try this document : click here

you may also check Troubleshooting wired home networks in Windows 10

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!