Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

enable disk's controller in bios

HP Recommended
Microsoft Windows 10 (64-bit)

I want to re install windows 10 on my ssd but it is showing me that please ensure that disk's controller is enabled in your bios.

While I'm looking for it in my bios there is no such option available. How can I fix this issue?

HP Support Agent
HP Support Agent
25,619 25,500 1,407 1,476
Message 2 of 2
Flag Post
HP Recommended



Welcome to HP support community.


Disable legacy mode and check if that works.

  1. Turn off the computer.

  2. Press the power button to turn on the computer, and then immediately press the Esc key repeatedly until the Startup Menu opens.

    Startup Menu

  3. Press F10 to open BIOS Setup.

  4. Use the right arrow key to select System Configuration, use the down arrow key to select Boot Options, and then press Enter.

    Boot Options selection in the System Configuration window

  5. Check for Legacy Support in the list.

  6. Boot options list including Legacy Support

  7.  use the down arrow to select Legacy Support, press Enter, select Disabled, press Enter.

  8. Press F10 to accept the changes, use the left arrow key to select Yes, and then press Enter to Exit Saving Changes to restart the computer.

Let me know if that works.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.


I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation