New HP Envy 5010 not pringing

[buildblog]

New printer installed, wirelessly but will not print.

HP SMart system says its' ready'. See screen shot.

But print system says: 'Looking for printer'.

Network IP details - see screen shot.

Any help would be appreciated.

Thanks.

[Kumar0307]

@buildblog, Welcome to the HP Support Community!

• Make sure the printer and the MAC are connected to the same wireless network.
• This printer supports only 2.4GHz network.
• The wireless status menu on your Mac should also give us quite a lot of information that would help us identify the issue. You can press and hold the option key on your keyboard and click the WiFi icon to get detailed information.

Let us try these steps:

Restart the network devices

1. Turn off the Router, Printer, and the computer/ mobile devices.
2. Wait for 60 seconds.
3. Turn on the Router first and wait for all the lights to stabilize.
4. Turn on the printer and allow it to configure itself.
5. Turn on the computer/ mobile devices.

Check the connectivity between the printer and the MAC

1. Obtain the IP address of the printer by clicking on the Wireless icon on the printer
2. On the MAC Go to Spotlight > search for Network utility > select Ping tab > enter the IP address of the printer in the box
3. Check the second box that says Send only > 10 pings
4. Click on ping > Check the results at the end if any packets are lost
5. Note: There should be 0% packet loss, share the results in your next post.

Install the printer using Airprint driver on your MAC(recommended)

Please ensure that the printer is up to date with its firmware and Mac is up to date with its software. If you are unsure you may use the links below to update the printer firmware and Mac software:

Update printer firmware

Update software on Mac 

1.) Click the Apple menu, click System Preferences, and then click Print & Scan or Printers & Scanners.

2.) Check if your printer name displays in the Printers list, If your printer is listed, click the printer name, click the minus sign to delete the printer.

3.) If you see multiple printer queues for the same printer, remove all extra printers by selecting them one at a time, and then clicking the minus button at the bottom of the list.

4.) Click the plus sign, click Add Printer or Scanner, click the printer name.

5.) Click the Use or Print Using menu, select AirPrint in the pop-up menu. Then click Add.

6.) Try to print.

Let me know how this goes.

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!