Set ZCentral Remote Boost to receive only one display from the sender

[bebuxodescalco]

Hello Kelly, I was reading some other threads about this configuration and i couldn't find an answer to my question.

Here goes my Setup:

The Sender:

HP Z2 running Win10 for workstations and a NVIDIA Quadro P600;

I've configured the First DisplayPort Port as headless with an EDID file;

The second DisplayPort has a monitor connected and in windows this is an extension of the main display (which is headless)

The Receiver:

Macbook Pro running Mac Os 12.0 Ventura

This machine has no external displays connected and only works with the built-in display.

What i'm trying to achieve here is being able to connect to the Sender but only Receive the image that is being showed on the headless DisplayPort, I need ZCentral to ignore the remaining monitors.  I've read on a different thread that in order to accomplish this:

I need to go to the app preferences on the Receiver side and on the tab "Connection" choose "Set Sender Display(s) to match the display properties" (which at this point is greyed out)  because first i need to add: 

Rgreceiver.Display.1.X=0

Rgreceiver.Display.1.Y=0

Rgreceiver.Display.1.Width=1680

Rgreceiver.Display.1.Height=1050

Rgreceiver.Display.1.Orientation=0

Rgreceiver.Session.0.RemoteDisplayWindow.X=0

Rgreceiver.Session.0.RemoteDisplayWindow.Y=0

to a file named rgreceiverconfig within the App Folder correct? Where can i find this within Mac Os? 

Thanks in advance

[KellyRGS]

Hello,

Apology for the delay.  The rgreceiverconfig file on the Mac receiver is located at Computer/Library/Application Support/HP/rgreceiver.  You should see a file called rgreceiverconfig.  Make sure you are using elevated privileges to modify the file.  Let me know if you need any further assistance with this.

Kelly

I am an HP employee.

[christopherthom]

To configure ZCentral Remote Boost to receive only one display from the sender, you need to adjust the receiver’s settings. This involves editing the rgreceiverconfig file within the application’s installation directory on the receiver’s system. You’ll specify the desired display’s resolution and orientation parameters, such as Rgreceiver.Display.1.Width and Rgreceiver.Display.1.Height, to match the single display you wish to receive. Ensure that the ‘Set Sender display(s) to match Receiver display(s)’ option is selected before connecting. For detailed guidance, refer to the user guide or seek assistance on the HP Support Community. Labcorp

[KellyRGS]

Hello,

Did you need further assistance in setting this up? If so, please send me an email at [email protected] with the subject title from this post.  Happy to help if it is needed.

Kelly

I am an HP employee.