Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2

59.C0 error

HP Recommended
LaserJet Pro 200 MFP M276nw
Microsoft Windows 10 (64-bit)

I received the 59.C0 error and cannot print.  I am connected directly to a wall outlet.  I have tried unplugging and plugging in several times.  I have attempted pulling all toner cartridges out of the printer.  In all cases, the 59.C0 error occurs at power-on.

Level 8
Level 8
1,082 1,065 96 180
Message 2 of 2
HP Recommended

It's caused by so called sticky solenoid which seat behind formatter, ADF......

Not so easy to get to it. You need to take out ADF,left,right,upper case.... first.

It controls black color and the other three colors (at the same time)to work with each other.

But because of sticky problem you got 59.C0 error.


What you need to do is to resolve the sticky solenoid issue.

Not an easy job to do but it's not so difficult either.

No need to really take apart everything before you to get to it .


What you really need to do is making a piece of V shape of paper its dimention maybe is 0.3 * 1.2 cm.

And find some ways to insert it into and between the solenoid's two metals to prevent the sticky issues happens again.

It will always has a small hole between gears and plastics. Find it out and insert the V shape paper into it. 

After done that you will be fine.


You need a thin paper don't make it too thick!






Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation