cancel
Showing results for 
Search instead for 
Did you mean: 
moazbasha
New member
2 0 0 0
Message 1 of 2
120
Flag Post
HP Recommended

A5 long-edge print

M402, M501
Microsoft Windows 10 (64-bit)

Does M501dn and M402dn support printing on A5 paper by long edge side

To solve slowly printing on A5 due to fuser behavior 

1 REPLY 1
Level 11
Level 11
3,503 3,489 345 730
Message 2 of 2
99
Flag Post
HP Recommended

A5 long-edge print

A5 paper is 8.27" on the long side so you should be able to. You will likely either need to setup a custom size or play with the portrait/landscape settings. This may not completely eliminate the slow down as the paper is not going all the way to the edge and it might still slow down to prevent warping of the fuser rollers. The behavior as you call it, is designed to ensure that you get the most life out of the printer as possible. If it did not slow down, everyone would complain about short fuser life. 

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation