-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- LaserJet Printing
- Blocked printer
Create an account on the HP Community to personalize your profile and ask a question
08-14-2019 10:22 AM
I had a blockage and removed it but still cant print. If I switch off the power then on I don't get the normal mechanical noises of bits moving. The at5tention light is flashing. There is no sign of any blockage after removing the cartridge I removed all the original blockage.
Solved! Go to Solution.
Accepted Solutions
08-17-2019 12:11 PM
Hope the printer working fine!
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Have a great day!
Cheers:)
Raj1788
I am an HP Employee
08-16-2019 05:01 PM
Check if the carriage is moving freely.
I suggest you do a Hard Reset on the printer
(1) Turn the printer on, if it is not already on.
(2) Wait until the printer is idle and silent before you continue.
(3) With the printer turned on, disconnect the power cord from the rear of the printer.
(4) Unplug the power cord from the wall outlet.
(5) Wait at least 60 seconds.
(6) Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
(7) Reconnect the power cord to the rear of the printer.
(8) Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Refer to this document: https://support.hp.com/us-en/product/hp-laserjet-1022-printer-series/439424/document/c01561369 for Paper Jam.
Change and Clean the Pickup Roller click here: https://support.hp.com/us-en/product/hp-laserjet-1022-printer-series/439424/document/c00381669
Keep me posted, how it goes!
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Thank you for joining the HP Community:)
Have a great day!
Cheers:)
Raj1788
I am an HP Employee
08-17-2019 12:11 PM
Hope the printer working fine!
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Have a great day!
Cheers:)
Raj1788
I am an HP Employee
Didn't find what you were looking for? Ask the community