-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- LaserJet Printing
- Can iOS Devices Print to HP LaserJet Pro M12w Printer?

Create an account on the HP Community to personalize your profile and ask a question
12-22-2016 09:50 AM
Recently installed a LaserJer Pro M12w to replace a LaserJet P1102w that died of a paperjam near the fuser and can no longer be purchased.
The M12w works fine as a wireless networked printer for everything but printing documents from iOS devices (iPads, iPhones, etc.). It doesn't show up on the Print/Printer Options/Select Printer screen at all.
Is there a way or a workaround to get this printer to work on iOS devices? Thanks for any help.
Solved! Go to Solution.
Accepted Solutions
12-22-2016
11:35 PM
- last edited on
08-22-2024
06:26 AM
by
JessikaV
Hi,
The HP Laserjet Pro M12w does not support Apple's Airprint, however you may print using the HP ePrint app as listed by the following chart:
https://support.hp.com/us-en/document/ish_2843711-2427128-16
Follow these steps to print using the HP ePrint app to your printer:
http://support.hp.com/rs-en/document/c01923321
Regards,
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
12-22-2016
11:35 PM
- last edited on
08-22-2024
06:26 AM
by
JessikaV
Hi,
The HP Laserjet Pro M12w does not support Apple's Airprint, however you may print using the HP ePrint app as listed by the following chart:
https://support.hp.com/us-en/document/ish_2843711-2427128-16
Follow these steps to print using the HP ePrint app to your printer:
http://support.hp.com/rs-en/document/c01923321
Regards,
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂