cancel
Showing results for 
Search instead for 
Did you mean: 
JohnZ1
New member
1 0 0 0
Message 1 of 6
984
Flag Post
HP Recommended

Cannot instal; getting error 0x80043c02

HP LaserJet Pro MFP M130nw
Microsoft Windows 10 (64-bit)

Used Win 10 to find printer, entered WPS code off label, getting error message.

5 REPLIES 5
HP Support Agent
HP Support Agent
6,247 6,228 311 451
Message 2 of 6
945
Flag Post
HP Recommended

Cannot instal; getting error 0x80043c02

@JohnZ1

 

Good Day. A warm welcome to the HP community. I reviewed the case regarding issues with the printer. I will be delighted to assist you here. 

 

follow these steps to reset the printer.

 

Turn the printer on, if it is not already on.

Wait until the printer is idle and silent before you continue.

With the printer turned on, disconnect the power cord from the rear of the printer.

Unplug the power cord from the wall outlet.

Wait at least 60 seconds.

Plug the power cord back into the wall outlet.

   NOTE:

HP recommends connecting the printer power cord directly to the wall outlet.

Reconnect the power cord to the rear of the printer.

Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

 

Keep me posted. 🙂

Barachiel
I am an HP Employee

Reply
0 Kudos
Kewhawker
New member
1 1 0 0
Message 3 of 6
295
Flag Post
HP Recommended

Cannot instal; getting error 0x80043c02

I have an HP OfficeJetPro 6960 All-in-one that has worked well (and still does) linked by wireless to my Acer PC. I am trying to print from an Acer Spin 5 Laptop. The latter says the printer is offline. The HP Smart App says the printer is ready but still no printing. I have received the Error 0x80043c02. Any suggestions?

 

Reply
0 Kudos
Highlighted
kathea1
New member
4 3 0 0
Message 4 of 6
253
Flag Post
HP Recommended

Cannot instal; getting error 0x80043c02

My printer will not stay on, even after I unplug both plugs, plug back in

Reply
0 Kudos
kathea1
New member
4 3 0 0
Message 5 of 6
252
Flag Post
HP Recommended

Cannot instal; getting error 0x80043c02

same here except I have the 4630 series

Reply
0 Kudos
kathea1
New member
4 3 0 0
Message 6 of 6
251
Flag Post
HP Recommended

Cannot instal; getting error 0x80043c02

thank you Barachiel, it is still not working, it will not even stay on

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation