-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- LaserJet Printing
- Connection

Create an account on the HP Community to personalize your profile and ask a question
11-13-2026 07:33 AM
Hi @Karma333,
Welcome to the HP Support Community.
I understand that you removed the printer from the HP app while trying to add it again, and the printer is now blinking and showing E8.
Removing the printer from the HP app does not damage or reset the printer. Before proceeding, could you please share the complete printer model number, such as HP DeskJet 43xx or 43xxe? You can find it on the front of the printer or on the product label.
Also, please confirm whether the display is alternating between E and 8, and let us know which other lights or icons are blinking. HP’s error-code guidance for the DeskJet 4300 series does not list E8 as one of the standard errors, so the exact display and model will help us avoid giving you the wrong steps.
In the meantime, try restoring the printer to Wi-Fi setup mode:
- Make sure the printer is turned on.
- Press the Cancel button once to make sure the printer is ready.
- Press and hold the Wireless button and the Cancel button together for approximately 5 seconds, until the Power button starts blinking.
- Wait about 60 seconds. The blue Wireless light should begin blinking continuously.
- Keep the printer close to the Wi-Fi router.
- Open the HP app and select Add Printer or the + icon.
- Select the printer when it appears and follow the instructions to reconnect it to Wi-Fi.
For this printer family, Wi-Fi setup mode remains available for approximately two hours, so complete the setup in the HP app within that period.
During setup, make sure:
- Your phone or computer is connected to the Wi-Fi network you want the printer to use.
- Bluetooth and location permissions are enabled for the HP app on a mobile device.
- Any VPN connection is temporarily disconnected.
- The printer is placed close to the router and the phone or computer.
If the printer continues displaying E8 even after restarting it and restoring Wi-Fi setup mode, please do not repeatedly reset it. Share the exact model number and, if possible, a picture of the printer display and blinking lights so we can identify the condition correctly and provide the model-specific steps.
You can also refer to the official HP instructions: Restore Wi-Fi setup mode on your HP printer | HP® Support.
Take care and have a good day!
I'm an HP Employee.
If this reply helped resolve your issue, please select the Accept as Solution as it helps others in the community quickly find the answer they’re looking for.
And if you found this reply helpful, clicking Yes below is a great way to let us know we’re providing the support you need, as it encourages us to keep improving and sharing helpful guidance.