-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
2
0
0
HP Recommended
I have issues with this kind of ghost paper, i tried to see if the cartridge and fuser are the problem, but no it isn't from there. I put the cartridge with another similar printer and is working, and at fuser is clean.
HP Recommended
Looks like a drum contact or high voltage issue. Check to make sure all the metal contacts in the cavity are clean and not bent.
If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
2
0
0
HP Recommended
I tested the drum with another similar printer and it works. the high voltage board appears OK, but at the cavity i have troubles, im novice at spooting issues with metal contacs.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community