cancel
Showing results for 
Search instead for 
Did you mean: 
michael77795
New member
4 3 0 1
Message 1 of 8
3,356
Flag Post
HP Recommended

HP Color LaserJet Pro MFP M479fdw radius (802.1X) problem

HP Color LaserJet Pro MFP M479fdw
Microsoft Windows 10 (64-bit)

Hi everyone,  we want to connect the printer to the network via WI-FI. The authentication is done via radius server. Unfortunately we have no possibility to make the appropriate settings in the EWS for radius.

 

What possibilities do we have to connect the printer to the network via radius. Many thanks in advance!

 

 

 

7 REPLIES 7
Level 11
Level 11
3,531 3,517 347 733
Message 2 of 8
1,930
Flag Post
HP Recommended

HP Color LaserJet Pro MFP M479fdw radius (802.1X) problem

This is an older document but discusses HP Laserjet Networking http://h10032.www1.hp.com/ctg/Manual/c00731218

 

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
michael77795
New member
4 3 0 1
Message 3 of 8
1,889
Flag Post
HP Recommended

HP Color LaserJet Pro MFP M479fdw radius (802.1X) problem

Hi, thanks for the answer. Unfortunately this PDF does not help me much. It refers to an HP Jetdirect Print Server. We do not need the Jetdirect Print Server because our printer ( HP Color LaserJet Pro MFP M479fdw ) must support Radius. Thanks for the effort anyway.

Reply
0 Kudos
Level 11
Level 11
3,531 3,517 347 733
Message 4 of 8
1,877
Flag Post
HP Recommended

HP Color LaserJet Pro MFP M479fdw radius (802.1X) problem

I checked my support documentation and did not find any relevant documentation for configuring this printer to a radius server and I will freely admit I am no expert on Radius. That said, this device does support 802.1x authentication, does support Enterprise WPA2 and has the option to install CA cert which I believe should be all the blocks you need to make this happen. 

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
michael77795
New member
4 3 0 1
Message 5 of 8
1,875
Flag Post
HP Recommended

HP Color LaserJet Pro MFP M479fdw radius (802.1X) problem

is it necessary to import the CA certificate from the radius server to the printer?

Highlighted
Level 16
Level 16
26,379 26,103 4,656 10,254
Message 6 of 8
1,729
Flag Post
HP Recommended

HP Color LaserJet Pro MFP M479fdw radius (802.1X) problem

Hi,

Actually, as much as I can see Radius is not a supported option for your printer (I do not have much knowledge on such in general, just considering the listed terms)

 

See the Security Management section of its specs (unless some other listed term may indicate the same?):

http://h20195.www2.hp.com/v2/getpdf.aspx/4AA7-4959EEP.pdf

 

Shlomi

2019_MeetupAward_Signature_FINAL(1).png
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution 🙂
Reply
0 Kudos
michael77795
New member
4 3 0 1
Message 7 of 8
1,719
Flag Post
HP Recommended

HP Color LaserJet Pro MFP M479fdw radius (802.1X) problem

Hello, if the printer has WPA2-Enterprise or the settings for 802.1X, it must be radius-compatible or am I getting it wrong?  ? 

Reply
0 Kudos
Grig1gs
New member
1 1 0 0
Message 8 of 8
359
Flag Post
HP Recommended

HP Color LaserJet Pro MFP M479fdw radius (802.1X) problem

Hi everyone, we want to connect the printer to the network via WI-FI. The authentication is done via radius server. But, i am still getting an error!

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation