Hp Laserjet 1536dnf : 52 scanner error

[Asaachy]

My hp Laserjet 1536dnf is showing 52 scanner error message and i have turn it off and back on and that hasn't help. Please assist. Thank you.

[Rainbow23]

Hi @Asaachy,

Welcome to HP Forums, this is a great place to get support, find answers and tips.

Thank you for posting your query, I'll be more than glad to help you.

I understand that you get a 52 scanner error on your HP LaserJet Pro M1536dnf Multifunction Printer.

This could be a hardware issue with the scanner mechanism.

Let's go through a few steps to troubleshoot this issue.

And here's the step by step guide for you listed below to reset the printer:

1.Turn the printer on, if it is not already on.
2.Wait until the printer is idle and silent before you continue.
3.With the printer turned on, disconnect the power cord from the rear of the printer.
4.Unplug the power cord from the wall outlet.
5.Wait at least 60 seconds.
6.Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7.Reconnect the power cord to the rear of the printer.
8.Turn on the printer, if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
9.Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

If the issue still persists, then you may need to contact HP phone support for further assistance at the link: www.hp.com/contacthp

You have a good day ahead.