Hp Laserjet Pro M102a Network print Problem

AAJoyFF · ‎11-13-2017

Hi

Recently i buy a Hp Laserjet Pro M102a (Not Wireless). I conected my printer to my home computer network. When i print from another computer . Its show me unable to print. My firewall is off . Printer sharing is ok, security option selected for everyone .

In Hp printer software Icon > Energy > Sleep Time > 1 Hour

Alex-TATS · ‎11-13-2017

Hi @AAJoyFF,

So, if I understand correctly, you have connected your printer to your PC via the USB cable. I assume it prints fine from your PC and not from other PC's? In order to print from other PC's, you will have to have all PC's in the same network as with the one that connects to the printer and share this printer on the network. Also, this PC (the one that is directly connected to the printer) must be powered-on in order other PCs can access the shared printer. Also, can you tell us what operation system you use on the host PC?

Cheers!

ALEX-TATS
Printer Engineer for a HP Platinum Partner
I am not a HP employee
If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up" button!

AAJoyFF · ‎11-14-2017

Thank you for your reply.
you are right.

My host pc windows 7 ultimate 64bit

Alex-TATS · ‎11-15-2017

If my suggestion resolved your problem then please mark it as an accepted solution so that others with the same problem can see it.

If not, please inform us of what you have done so far towards the solution of this issue.

Cheers!

ALEX-TATS
Printer Engineer for a HP Platinum Partner
I am not a HP employee
If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up" button!

cermai · ‎11-22-2017

I also have the same problem, when everything is installed properly (on the host computer and client) but when I try to print from the client computer can not always have a message"Test page failed to print. Would you like to view the print troubleshooter for assistance?" host and client with windows Xp sp3-32bit.

but if I install using : "Add Printer - add a local printer - create a new port - local port" on client computer HP laser Jet Pro M102a printer successfully installed but when "test print" printout does not come out at all

what should i do to solve the problem ??
thank you

AAJoyFF · ‎11-22-2017

Same problem.............

cermai · ‎11-22-2017

HP Laserjet Pro M102a can not be shared on the network ??

AAJoyFF · ‎12-11-2017

Hp Laser Jet Pro M102a support network sharing .

Create an account on the HP Community to personalize your profile and ask a question