Hp e57540 print red all over page and waste toner

[Jahzari]

Hp e57540 print red all over page and waste toner

[M_Salman]

Hi @Jahzari,

If your HP E57540 printer is printing red all over the page and appears to be wasting toner, follow these troubleshooting steps:

1. Check Toner Cartridges:

   • Remove and reseat the toner cartridges to ensure they are installed correctly.
   • Inspect the toner cartridges for any damage or leaks. Replace if necessary.

2. Clean the Printer:

   • Open the printer and gently clean any visible toner spills using a lint-free cloth.
   • Check for any debris or obstructions in the toner cartridge area.

3. Adjust Print Settings:

   • Access the printer properties through your computer’s control panel or print dialogue.
   • Adjust color settings and ensure the printer is set to the correct colorspace (CMYK).

4. Perform a Printer Calibration:

   • Use the printer's control panel to run a calibration routine. This can align the colors and improve print quality.
   • Refer to your printer's user manual for specific instructions on performing calibration.

5. Update Printer Firmware:

   • Go to the HP Support - Software and Driver Downloads page.
   • Enter your printer model and download the latest firmware updates.

6. Inspect Imaging Drum:

   • If your printer uses a separate imaging drum, inspect and clean it. Replace it if it shows signs of wear or damage.

7. Run Diagnostic Tests:

   • Use any built-in diagnostic tools in your printer settings to identify and resolve issues.

8. Check for Electrical Connection Issues:

   • Ensure all cables are securely connected and not damaged.
   • Try connecting the printer directly to a wall outlet.

9. Reset the Printer:

   • Turn off the printer, disconnect it from the power source, wait for a minute, and then reconnect and turn it on.