LaserJet 1300n IP Address

[kpreston]

I have a LaserJet 1300n that I am unsure what the IP address is for it so I can hook it up. Also, I need to know how to manually set the IP address to what I am wanting. How would I go about doing this? 

[davidzuts]

Press the go button for at least 5 seconds and release. The printer will print a config page which will contain the ip address of the printer. Type that address into your web browser and then configure the address as you want. If the printer has been configured before and the address is not within your frame (you can not access the web browser). Then perform the cold reset below and wait a couple of minutes after the printer comes to ready to print the config page and the printer will obtain an address in your frame from your router or switch.

To perform a cold reset
1 Turn the printer off.
2 Press and hold down the GO button.
3 Turn the printer on, and continue to hold the GO button for at least
5 seconds, but not longer than 15 seconds. During this process,
the Attention LED will turn on.
4 Release the GO button.
Note If both the Attention and the Ready LEDs turn on before you release
the GO button, you must start the procedure again with step 1.
5 The printer’s LEDs will begin cycling. The cold-reset process will
run until completion, and the printer will return to the ready state.