LaserJet Pro 200 color MFP M276nw/ a code 79 service error turn off then on, on screen the product

[smseverino]

It's dead.  I'm on my second one of these things,because the first one had the 79 error and it was replaced by HP.  Now the replacement on is dead also.  They need to replace these defective units with a different model. 

I just hope this is being monitored by HP.  I don't have time to troubleshoot the 2nd one............the first one took forever and I frankly don't have the time.

[CelticGoddess]

I too encountered this ERROR CODE 79 with instructions to turn my LaserJet Pro 200 M276 off and then on.  Thanks to the information here - I decided to cancel that print job. 

A test page printed out perfectly.  Then I printed one page of a PDF.  Perfect again.  Then four pages, looking great.  But when I went to print out a subsequent 8 page PDF text document, once again - ERROR 79.  I'll get some sleep and see if I can solve it tomorrow.  Good luck to all here!

[Walker_COL]

En mi caso, creo que puede deberse a un problema de la tarjeta de red (alambrada e inalámbrica). Le realicé un "Reset a Fábrica" para borrar la configuración inalámbrica y le quité el cable de red. La he instalado con cable USB finalmente. Si trato de colocar el cable de red o configurar la red WIFI, vuelve a producir el "Code 79 Error" una y otra vez. Igualmente, de nada sirve actualizar el firmware.

In my case, I guess it is a hardware network problem (ethernet and wireless). I have done a "Default Reset", so I assure erase the wireless configuration, and I have removed the network cable. Finally, I have installed it with the USB cable. If I try to put the network cable or to configuring the WIFI network, it generates the "Code 79 error" again and again. In a similar way, it is useless to update firmware.

I hope that HP give us a clue for fix this kind of problem.

---

[Stosh13]

I cleared out the printing queue, turned off and restarted the printer.  It worked

[AH-HU]

Dear All

I think I solved this problem 

1- uninstall a program of the printer from your computer

2- re installing the program of HP Printer .

best regards

Eng. Ahmed Al-Khafaji

[Raymond-Soh]

Hi,

I tried to update the software of the printer using USB.

However, it proceeded till 99% and then aborted with an error.

Please find error message.

I've been having Service Error 79 but nothing seems to work.

[Kezook]

None of the things suggested here worked for me re the 79 service error, it only seems to be the one PDF that won't print, it does the first page then goes back to the error code, I printed the document from my iphone using Airprint, that worked, not a satisfactory way to do it but better than nothing!

[PianoPaul]

Convert your text to paths before exporting to PDF. Some fancy fonts can cause problems.

[Albandri]

I have the same problem and can't work

[orga]

device error

please (OK) to continue