Solved: Low Temperature On Fuser Unit - HP Support Community

Asyraaf · ‎12-19-2017

when I print out the paper find the toner incorrectly attached to the paper and fuser is not hot

Copier-Pro · ‎12-20-2017

The machine should give a error.But it does sound like you are having a fuser problem.Have the united repaired or replaced.Hope this will help.

I am A certified Copier Technician.
It is so nice to give some help where possible and the forum is a great idea Thank You.Sometimes a picture speaks louder than words to find a solution.Should you find my help use full just give some credit for my effort please.
.Thank You.Copier-Pro
If you found this post helpful, you can let others know and also show your appreciation by clicking the “Accept as Solution”button, “Thumbs up" button!

#################################################################
I'M NOT AN HP EMPLOYEE AND DO ANSWER THESE QUESTION ON MY OWN BEHALF.
#################################################################

View solution in original post

Copier-Pro · ‎12-20-2017

The machine should give a error.But it does sound like you are having a fuser problem.Have the united repaired or replaced.Hope this will help.

I am A certified Copier Technician.
It is so nice to give some help where possible and the forum is a great idea Thank You.Sometimes a picture speaks louder than words to find a solution.Should you find my help use full just give some credit for my effort please.
.Thank You.Copier-Pro
If you found this post helpful, you can let others know and also show your appreciation by clicking the “Accept as Solution”button, “Thumbs up" button!

#################################################################
I'M NOT AN HP EMPLOYEE AND DO ANSWER THESE QUESTION ON MY OWN BEHALF.
#################################################################

SHThompson · ‎12-28-2017

If your printer is a P4015 you may have an issue that is developing due to Firmware, many people never update their printer Firmware and some of the earlier versions for the P4015 caused Fusers to fail prematurely, although not with the sympom you have.

It is also possible that the Fuser Mode for the paper type you are printing has been changed from the default setting to a lower temperature.

One more thing, if you are using Heavy Media you need to tell the printer what media type you are using, the Fuser runs hotter when you print on Heavy Media.

If you are printing checks and using MICR Toner you have to run the fuser hotter than normal for the MICR toner to melt to the paper. (simple way to do this is select heavy media in the driver).

If my post resolves your issue please click the accepted as solution button under it.

To thank a Tech for a post click the thumbs up button under the post.

You can even click both buttons. . .

Low Temperature On Fuser Unit

Create an account on the HP Community to personalize your profile and ask a question