M402n with 3 trays. Setting default tray to 2

irwinpostmaster · ‎06-12-2018

M402n Want to set default tray.

My M402n has 3 trays (manual feed, Tray2 and Tray 3) I want to set the default tray to Tray 2 for all printing. Using tray 3 for a pre-printed form where software sends command for printer to use tray 3 and then send a reset command after use.

Copier-Pro · ‎06-12-2018

Hi I would like to assist to the best of my ability to solve your problem.I hope the information i supply will be of help.Just for information some technical information is protected by HP and is not allowed to be answered.This is unfortunate and you will have to contact a HP repair shop for the help in this case.In most cases the cassette is the default tray.So tray 2 is the default and Tray 3 is extra.Once printed from tray 3 in this case the machine will default back to tray 2 as default after that print.Hope this will help.

I am A certified Copier Technician.
It is so nice to give some help where possible and the forum is a great idea Thank You.Sometimes a picture speaks louder than words to find a solution.Should you find my help use full just give some credit for my effort please.
.Thank You.Copier-Pro
If you found this post helpful, you can let others know and also show your appreciation by clicking the “Accept as Solution”button, “Thumbs up" button!

#################################################################
I'M NOT AN HP EMPLOYEE AND DO ANSWER THESE QUESTION ON MY OWN BEHALF.
#################################################################

Create an account on the HP Community to personalize your profile and ask a question