M607 Printer resolutions

Kelly4250 · ‎03-18-2019

Afternoon all.

We have a situation where we would rather have the faster first page print speeds of a 300dpi vs the 1200pdi default of the universal driver for the M607. The driver only gives us the option of Fastres 1200. Is there a solution to drop the resolution down. or is there another HP driver that may work to over different resolutions. The I have not tried but HP drivers were always a good standard to use as a generic. Is there a "good" newer PCl 6 generic driver. that people are able to use.?

SHThompson · ‎05-03-2019

Have you tried the PCL5 UPD?

If my post resolves your issue please click the accepted as solution button under it.

To thank a Tech for a post click the thumbs up button under the post.

You can even click both buttons. . .

Repairatrooper · ‎05-03-2019

HP UPD PCL6 6.7 offer 600 dpi resolution. As suggested you could check UPD PCL5 the newest version of that is 5.9, HP has stopped developement on the PCL5 drivers so this would be the only option.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Create an account on the HP Community to personalize your profile and ask a question