-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- LaserJet Printing
- M806 LVPS

Create an account on the HP Community to personalize your profile and ask a question
03-04-2020 11:07 AM
Hello All,
My 806 was running then went blank. I found the main 10A fuse was blown. I did replace it and it powered up went through the checks, got the home screen then it blew. Could the fuser be causing this?
Solved! Go to Solution.
Accepted Solutions
03-04-2020 01:08 PM
Possibly, I would replace the fuse, remove the fuser and power the unit up. If it completes boot and stays on but prompts for fuser then fuser may be bad. If it blows the fuse even with the fuser removed then there is other issues. Have you changed the fuser lately? Did this error start after any notable events either maintenance on printer or an electrical issue such as a brown out or surge?
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
03-04-2020 01:08 PM
Possibly, I would replace the fuse, remove the fuser and power the unit up. If it completes boot and stays on but prompts for fuser then fuser may be bad. If it blows the fuse even with the fuser removed then there is other issues. Have you changed the fuser lately? Did this error start after any notable events either maintenance on printer or an electrical issue such as a brown out or surge?
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.