New Gateway

[poppie7]

how to connect printer  HP Laser jet MFP29W to new  wi fi gateway

[Kuroi_Kenshi]

Hi @poppie7,

Welcome to the HP Support Community!

You can reconnect your HP LaserJet Pro MFP M29w to your new Wi-Fi gateway by resetting its wireless setup and configuring the new network.

Connect the printer to your new Wi-Fi network.

Prepare the printer: 

Turn on the printer and place it near your new Wi-Fi gateway.

Reset the wireless setup mode: 

Press and hold the Wireless button and the Cancel (X) button together for approximately 5 seconds, until the Power button starts blinking. 

Wait for the wireless light to begin blinking.

Connect using the HP app: 

On your computer or smartphone, connect to your new Wi-Fi network. 

Open the HP app, select Add Printer, and follow the on-screen instructions to connect the printer to the new network.

Complete the setup: 

Once the printer connects successfully, the wireless light should stop blinking. 

Try printing a test page to confirm the connection.

For detailed instructions, refer to the official HP LaserJet Pro MFP M29w setup and user guides.

If the printer does not enter wireless setup mode, please let us know which lights are blinking on the control panel and whether your new gateway uses a combined 2.4 GHz/5 GHz network. We can then guide you through the appropriate next steps.

Best regards,
Kuroi_Kenshi