PRINTER ON MANUAL FEED

[Greenie1347]

My printer is on manual feed when I make a number of copies I have to keep pressing the button I can't get it off manual feed any suggestions? 

[davidzuts]

You need to check the settings for the paper tray for size and type paper and then compare those settings with driver settings.  In other words if you have letter paper in tray 2 and the type is set to plain or any you have to make sure your driver is set to the same.  If for example the driver is set to letter and type bond it will ask you to load letter bond in tray 1 for each sheet of the job.

[Greenie1347 · Accepted solution]

It is all fixed Thank You

[hhrumph]

What did you do to repair and fix the problem?  And how do you look at the drivers and make sure that they match the screen in the printer?

[hhrumph]

What did you do to repair and fix the problem?  And how do you look at the drivers and make sure that they match the screen in the printer?  With the settings screen selected for letter size, paper set to any, still need to manually feed one page at a time thru the single page feeder.  Whats up with that?