• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines

Featured blog article:

HP Recommended
HP LaserJet Pro MFP M29w Printer
Microsoft Windows 11

This used to be the most reliable printer I owned.  I could print from my phone or from my laptop with no issue whatsoever.  For the past 3 months I have been battling with this printer simply printing from my laptop.

 

i have checked and followed all the diagnostic information that HP has on their website and when I run diagnostics the printer checks out as all is fine.  The reality is I can't print multipage documents and most times it takes me multiple times to print a single page document.

 

The characteristics are as follows:

1)  The printer cycles on and the on/off light on the control panel flashes on and off.  When the print fails, the triangle light (warning?) flashes and I get no printout.  Further, there is nothing on the print queue.

2)  When it works, the warning light doesn't flash and i get a single page printed even when the document is multiple pages.

 

I have checked the wireless settings and my printer and laptop are on the same wifi extender.  I have unplugged and plugged the network and printer and laptop so many times i can't remember.   I have downloaded new drivers and power cycled everything for that as well. 

 

I have read the HP message boards which blame HP for a flawed wireless implementation.  Is that the issue and I just need to buy a new printer?  The odd thing is that I have always had this printer configured wirelessly and when it was new and I ran Windows 10, I had no issues.  What gives?

1 REPLY 1
HP Recommended

Hi @KevinU,

Thanks for the detailed description. On the LaserJet Pro MFP M29w, jobs that vanish from the queue, single pages printing out of multipage documents and the warning light blinking usually mean the job data is being cut off on its way to the printer. The Wi-Fi extender is a common cause.

Option 1 – Stabilize the connection

  1. Connect the printer directly to the main router's 2.4 GHz network instead of the extender (laptop can stay on any band of the same network).
  2. Reserve a fixed IP for the printer in the router's DHCP settings.
  3. Update the printer firmware from https://support.hp.com/drivers (LaserJet Pro MFP M29w > Firmware).

Option 2 – Use the full HP driver

  1. Remove the printer from Settings > Bluetooth & devices > Printers & scanners and its driver with printui /s /t2 > Remove driver and driver package. Restart.
  2. Install the full driver for the M28–M31 series from https://support.hp.com/drivers and choose the wireless connection during setup.
  3. Print a multipage test.

If it still fails, test once with a USB cable; if USB works perfectly, the problem is confirmed to be the network path.

Let me know how it goes!


I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).


† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->