cancel
Showing results for 
Search instead for 
Did you mean: 
Pir1
New member
2 1 0 0
Message 1 of 4
149
Flag Post
HP Recommended

Printer HP 2055 fusing temperature

Microsoft Windows 10 (32-bit)

Hello, 

Does any body know how can I figure out hp 2055 fusing temperature? Is it mentioned in its booklet?

3 REPLIES 3
Level 11
Level 11
3,561 3,547 353 740
Message 2 of 4
132
Flag Post
HP Recommended

Printer HP 2055 fusing temperature

How precise of temperature do you need? Maximum temperature is around 427 C.  and most HP printers offers setting ranges depending on paper but do not have a set by degree option. If you need to know exactly a infrared non-contact thermometer would be the most accurate.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
Pir1
New member
2 1 0 0
Message 3 of 4
98
Flag Post
HP Recommended

Printer HP 2055 fusing temperature

Hi, I was interested to know about the maximum temp to find out the best possibile lubricant, which could be used instead of silicone oil. Thank you in advance. 

Reply
0 Kudos
Level 11
Level 11
3,561 3,547 353 740
Message 4 of 4
90
Flag Post
HP Recommended

Printer HP 2055 fusing temperature

Curious as to what you are lubricating. The only real lubricant in a monochrome fuse is on the heating element to keep the fuser film from sticking to it and that is a high temp paste not oil. I have heard of dome techs claiming to use brake grease due to the temps it can endure but make no guarantee on that.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation