Printer issues

[kelphou21]

Your printer has experienced an unexpected configuration problem 0x8007007e, status will say unknown, sleep mode and offline when I check a few sources and Ive tried everything from uninstalling and reinstalling to doing all updates to computer please help!

[Raj1788]

@kelphou21

Welcome to the HP Community

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Update the firmware for the printer using this link: https://support.hp.com/in-en/product/hp-laserjet-pro-mfp-m28-m31-printer-series/16647082/model/16647...

Restart the Printer.

I recommend you delete the driver at the root level and Install the drivers, follow the steps below:

Remove the USB if connected

1.) In Windows, search for and open Programs and features 

2.) Select your HP Printer 

3.) Select Uninstall 

4.) In Windows, search for and open Devices and printers 

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose `Delete' or `Remove Device' 

6.) Open up the run command with the "Windows key + R" key combo. 

7.) Type printui.exe /s and click Ok. (Note: there is a space in between "printui.exe" and "/s") 

8.) Click on the "Drivers" tab 

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers 

Then, Click on this link:  https://support.hp.com/in-en/drivers/selfservice/swdetails/hp-laserjet-pro-mfp-m28w-printer/16647088... to download and install the HP LaserJet Pro MFP M28/M29/M30/M31w Printer Full Software Solution.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)

[kelphou21]

OK, I have done this one time by myself before reading this and still had the issue. I read all instructions the second time and results are the same, when I get to the step where I go to the printer home page under advanced settings, the printer says it is in sleep mode even though, the app and everything says that the printer is ready with a green checkmark. The network is perfect everything working there and connected, its when I actually go to a document and try to print it and the computer brings up the message that says exactly this..your printer has experienced and unexpected configuration problem with that code? I dont know what else to do?

[Raj1788]

@kelphou21

Download a special version of HP Print and Scan Doctor specifically created to help with a printer connectivity issue.

1. Download HP Print and Scan Doctor.

2. Run HPPSdr.exe from the download location on your computer.

3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

   • If your printer is not in the list, turn it off and on, and then click Retry.

   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

4. If a screen prompts you to turn on printer updates, click Yes.

5. If a screen prompts you to make your printer the default printer, click Yes.

6. Try to print.

Then, Assign Manual IP to the printer:

1) Print a Network configuration page from the printer's control panel. 

2) Look for IP address from the Network configuration page. 

3) Open web browser - Chrome or IE or any other browser that you are using. 

4) Type the IP address mentioned on Network configuration page into the browser's address bar or URL bar and press enter button. 

5) Go to the Network tab. 

6) Click on Networking from the left pane. 

7) Then click on Network Address (IP). 

😎 Click on Manual IP Address and go to suggest a Manual IP. 

9) Scroll down the screen and select Manual DNS server. 

10) Enter the Primary and secondary DNS server from the Network Configuration page into the Manual Preferred DNS server field. 

11) Click on Apply. 

Refer to the video link for step by step instructions - https://www.youtube.com/watch?v=SCnYyq80V9g 

Note: The video is for win 8 but steps are similar for other operating systems as well. You need to enter the IP address in the browser's URL or the address bar to access the printer page.

Create TCP/IP Port: 

1. Search Windows for devices, and then select "Devices and Printers" In the list of results.

2. Right-Click the name of your printer, and then select Printer Properties.

3. Click the Ports tab, click on "Add port" select "Standard TCP/IP Port" and click "New Port"

4. Click next on the Add Standard TCP/IP printer port wizard, enter the printer IP address and click next and then click on "OK".

5. Now under the "Ports" tab you will find the Newport with the printer IP address, click "Apply" and "OK".

6. Restart the computer.

Try to print.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)