Printer won't connect to phone to print.

[BlackWidow220]

I had another printer like this one and connected every single time just fine but this model is only different by one number. The old one was HP LaserJet M111 and this one HP LaserJet M110w both mobile printers. Which is why i bought them. I NEED TO PRINT FROM MY PHONE and I'm trying to connect the printer to my phone like i did the old one. Before i would do fine by turning on printer. Pressing and holding the wifi button for 3 seconds until the power and wifi both blank at the same time. Then my phone would find the printer on my wifi in my phone and I would connect. Somehow I turned off wifi just to pick out my next printable document then connect back to printer wifi and print. But this new printer says it was connected to an old wifi so I reset the network settings. Now says congratulations in successfully  setting up my new printer and I'm assuming now I CAN connect to my phone. So I'm pressing the wifi button and both power and wifi blink at the same time after holding it for like X amount of seconds but then wifi light stays blinking for ever and nothing happens and it still won't find the printer. What am I doing wrong?

[ferRX · Accepted solution]

Hi @BlackWidow220 

Ok, in this case for Laserjet M110w you need to press the Wifi  button

for 20 seconds, that is a long press.

• 

Please follow steps from the next video:

>> https://www.youtube.com/watch?v=iphT6p6PQco

•  

* Click YES   to say thank you, 

* Click Accepted as Solution when question is answered.

Best regards,

ferRX.

[BlackWidow220]

I edited my question so its a better understanding for you guys thank you so so much 😊

[ferRX]

Hi @BlackWidow220 

Thank you for adding more details 😇

Ok, in this case for Laserjet M110w you need to press the Wifi  button for 20 seconds,

that is a long press.

• 

Please follow steps from the next video:

>> https://www.youtube.com/watch?v=iphT6p6PQco

* Click YES   to say thank you, 

* Click Accepted as Solution when question is answered.

Best regards,

ferRX.

[BlackWidow220]

Thank you so much. I'm fairly new here so all the information shared is greatly appreciated. Now I'll give it a try! let's hope this works.

[ferRX]

Yes, we hope that printer works now and don't worry, take your time 😇

ferRX.