-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- LaserJet Printing
- Re: Printing a .prn file containing a patch
Create an account on the HP Community to personalize your profile and ask a question
02-14-2020 09:40 AM
Hello All,
I have a problem with 59.0F errors on a Color LaserJet Pro M452dn. As a part of the troubleshooting process, I was sent a firmware, or some such, patch in a .prn file. I was told to "print" that file from a USB drive, which would update the system, and possibly get rid of the error. I would be able to confirm that the fix was implemented by checking the Controller Number on the config page. The problem is that this model, at least as far as I can tell, does not support walk-up printing from a USB drive. I can only set it up for job storage. Is this true? Does the community have any info on how I might be able to run this .prn file that I have through my printer? Any other ideas on how to resolve the original error? I've already tried reseating both the fuser and the transfer belt and updating the firmware via the HP utility. Thanks!
Solved! Go to Solution.
Accepted Solutions
02-14-2020 01:05 PM - edited 02-14-2020 01:13 PM
If you search this forum for the Dropbox link I have posted for the m477 fix, it is the same file. There are detailed instructions in that Dropbox folder on applying the fix to an M452
If the fix is applied properly the DC controller revision should match the number listed in the documentation, 15xxx (I don't recall the exact number.)
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
02-14-2020 09:52 AM
Hi,
For such information, I suggest contacting HP Support in your country, the community is a peer to peer community and doesn't have such information about forcing a Firmware Reflash from a USB drive.
But generally, Walk-Up USB is not available for an HP Laserjet Pro M452dn printer indeed, so this would not be an option to flash a firmware, see page 8 of its manual:
http://h10032.www1.hp.com/ctg/Manual/c04628719
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
02-14-2020 01:05 PM - edited 02-14-2020 01:13 PM
If you search this forum for the Dropbox link I have posted for the m477 fix, it is the same file. There are detailed instructions in that Dropbox folder on applying the fix to an M452
If the fix is applied properly the DC controller revision should match the number listed in the documentation, 15xxx (I don't recall the exact number.)
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
Didn't find what you were looking for? Ask the community