Printing on small forms

[Pawinda]

I need to print on a 60mm X 160mm form sometimes in black and white and sometimes in color.  The M477 family of MFP's specs indicate that these printers can accept this small size paper format. Is that so? If so, what is max quantity I can load at one time and is this through the doc feeder, a multi-purpose tray or some other source? Thank you.

[ShlomiL]

Hi,

Such a size is not supported by the printer.

The printer supports a custom paper size of the following range, meaning that 60mm is too narrow and cannot be used with the printer:

76 - 216mm wide

127-  356mm long

You may find its paper specifications listed below:

https://support.hp.com/us-en/document/c04799975#AbT0

Shlomi

[Pawinda]

Thanks for the prompt reply. If I increase the form to 76mm by 160mm then it will fit and print without a problem? If so, where would I place the forms to print (doc feeder, special purpose tray, standard tray, etc.)? 

[ShlomiL]

Hi,

It can be placed on the Multipurpose tray (Tray 1) only, any other trays supports wider media only as described by the chart in the link included in my previous post.

See the last 3 'Custom' sections of the Paper Sizes list, each one represents another tray.

Shlomi

[Pawinda]

Shlomi, last question (promise!). I assume from the specs that the max number of forms that I could load at one time is 50. Is that correct. Thanks for all the help. Greatly appreciated.

[ShlomiL · Accepted solution]

You are much welcome, and indeed the multipurpose tray supports up to 50 sheets as listed under Paper handling below:

https://support.hp.com/us-en/product/hp-color-laserjet-pro-mfp-m477-series/7326560/document/c0482502...

Please feel free to ask any further question if needed.

Cheers,

Shlomi