02-14-2020 01:51 AM
Hello. I bought recomended printer for Laser Heat Transfers on shirts. I try use special papper to print transfers. Everything is fine when I print on plain papper. But when I try to use "Laser Transparent", this is "ruins" magnetic field of Earth... Printed papper have ghost prints on it and printer toner dust on the bottom of the printed page. After printing on "Laser Trasparent" papper I need to use Clean procedure. When my printer do clean procedure ant print cleaning sheet of papper, dirt from the toner clogs both sides of the sheet. Then I need print again couple times on plain papper to get clean prints again. Evertyhing fine again on plain paper, till I try use "Laser Tansparent"... What I do wrong?
02-14-2020 02:34 AM
The printer does not support transparent paper, you may find its specifications below, see the Media Types Supported section
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution 🙂
02-14-2020 02:43 AM
Why for others works well? People buy this printer for using with "Forever" pappers. This is a link where this model printer sells together with White toner for Heat Transfers. For Example:
02-17-2020 01:52 AM
Last Friday my printer brokes mechanically at all!
I'm bring "Forever Transparent" papper and try to print on oldest used "HP" MFP M177fw printer. This printer is do the job very well from the first try. The reason of my problem is only just my brand new "HP" M452nw.
I'm sorry "Forever" Support Team about my impatience.